Hello there
so I am trying for ages for my server to pop up to people i read probably every topic here but did not help me so my port is open (30120 ) https://canyouseeme.org/ checked here it was a success, I added inbound and outband rules in my firewall and still no luck my cmd shows :
Sending heartbeat to live-internal.fivem.net:30110 over and over, unfortunately still not poping any help ?
Most likely you have removed the # in front of the following line in your server.cfg.
#sv_master1 ""
Please make sure to add the # in front of that line like shown in the example above. If you remove that # then your server will be hidden from the serverlist.
If this is not the case, then please continue reading below.
Please check the following if you’re not seeing your server appear in the serverlist:
- Make sure your server is running
- Go to canyouseeme.org
- Fill in your port (default: 30120)
- Check your port
Could it see the service?
- A server can take up to 8 minutes to be shown in the serverlist after booting it up. Please be patient.
- In very rare cases, there might be an issue with the serverlist services, please be patient, we’ll look into it as soon as possible.
Could it NOT see your service?
There are multiple problems that could cause this, below you’ll find 2 possible causes (but there could be (many) more):
- Your ports aren’t properly forwarded.
- You have a firewall that blocks external connections.
canyouseeme.org shows my port is open and i can access from local host, regarding firewall I tried adding rules as I said and I tried shutting it down, as for server.cfg I did not remove the hashtag before sv_master1 “” it is just like you mentioned and it was online for 2 hours still no luck
Having the exact same problem. I also opened a topic for this. here
canyouseeme.org is able to see my server. My friends are able to connect via direct address. Heartbeats getting sent, over and over. But still not showing up…