Hello I have a FiveM server and some cars are so slow then
the Real Life Example:Bugatti Chiron 200 Km/H Maximum how to change the speed?
4 Likes
You need to edit the handling.meta for whatever vehicle you’re trying to make faster. The gearing and top speed can all be adjusted. Then stream the handling file.
I don’t find gearing or top speed in handling.meta…
1 Like
Go here and read this:
Where i must go to edit the top speed of the car.I readed the think you give to me but im not english and i dont know very good the english.
1 Like
Adjusting these four values will make the car faster:
fDriveInertia
Describes how fast an engine will rev. For example an engine with a long stroke crank and heavy flywheel will take longer to redline than an engine with a short stroke and light flywheel.
Drive inertia formula TBD
Value: 0.01 - 2.0. Default value is 1.0, or no modification of drive intertia. Bigger value = quicker redline
fClutchChangeRateScaleUpShift
Clutch speed multiplier on up shifts, bigger number = faster shifts
fClutchChangeRateScaleDownShift
Clutch speed multiplier on down shifts, bigger number = faster shifts
fInitialDriveMaxFlatVel
Determines the speed at redline in top gear. Setting this value does not guarantee the vehicle will reach this speed. Multiply the number in the file by 0-82 to get the speed in mph or multiply by 1.32 to get kph
Value: 0.00 - 500.0 and above.
12 Likes
Okey you didn’t say the location for the file that we need to modify in the server
1 Like
As said above this will be inside the vehicles handling.meta file.
1 Like
I have the handling, vehicles, carvariations and resourcelua in the car folder next to its stream folder and I try to increase the speed in the handling of this and it does not have any effect
each vehicle has this file you have to modify it in each one…
handling.meta
1 Like
“Multiply the number in the file by 0-82 to get the speed in mph”
Is this .82 or 82. Im assuming .82 but want to make sure before I do it and it not be correct.