Fire Supply Line [v2]
Fire Supply Line is a realistic water tank system, enabling you to connect to hydrants, setup light portable pumps and refill fire trucks, including sharing water between fire trucks - all performed through a realistic control panel. This resource has full integration with our Smart Hose resource through the use of dynamic ropes.
Discord Server
Join our Discord server here to stay up to date with new resources, exclusive previews and updates!
Video
Watch a video featuring the resource here:
Features
-
Advanced Control Panel - Each Fire Truck has an advanced control panel interface, allowing you to control the pump, intake valves, discharge vales and see the water/foam levels in the tank.
-
Water Tanks - Each fire truck can have a different sized water tank, allowing you to pre-configure them depending on the size of the model. Water tanks can run out and must be refilled before they can be used again by players on your server.
-
Connect to hydrants - In order to refill a fire truck, you can connect to any hydrant around the map and begin the refilling process. Getting ready to fight a fire in a remote area? Make sure you have filled your truck up beforehand in order to ensure a good amount of water to fight the fire.
-
Synced Water Levels - The water level in all fire trucks is fully synced between players on your server. Where multiple firefighters are using water from one tank, it will deplete at a much faster rate, especially if those firefighters are using their hoses on higher pressure.
-
Truck to Truck Connections - Easily share water between fire trucks by setting up a line and starting the transfer process on the control panel.
-
Light Portable Pump - Collect water from lakes, rivers and other sources using a Light Portable Pump. Easily set one up and connect it to both a water source and the truck, before pumping.
-
Dynamic Connections - To connect to hydrants and other trucks, you’ll need to grab a rope and walk it over to the target in order to make a connection.
-
Foam Creation - Foam is not automatically available and must be converted from water using the control panel available on fire trucks. Fire trucks can be configured to carry foam beforehand.
-
Permission Support - We’ve added permission support for QBCore, ESX, vRP, QBX and Ace Permissions straight out of the box. Want to integrate your own permission system or framework? Just make the necessary changes to the server utils file.
-
Integrations - Fire Supply Line is fully integrated with Smart Hose, working best when used hand in hand, especially with the new dynamic ropes update.
-
Custom Rope Colour - Easily change the colour of the rope in your config file, allowing it to be adjusted to suit your server.
-
Deck Gun Support - With support for deck guns and Smart Vehicle monitors, your water will only spray when you have the ladder pipe valve open and your tank is sufficiently filled.
-
Water Monitor Integration - This integrates with our Water Monitor resource, meaning you’ll need to setup a line and connect to monitors in order to enable them.
Purchase
Head to our store at https://store.londonstudios.net/forum to purchase this resource.
Integration
Fire Supply Line integrates perfectly with our Smart Hose and Smart Fires resources.
Support
We will provide support to all customers who have purchased this resource, either via the FiveM forum or our support panel here .
Screenshots
| Code is accessible | No |
| Subscription-based | No |
| Lines (approximately) | 1300 |
| Requirements | None |
| Support | Yes |
