[HELP] esx_doorlock add new doors

DutchMgamer · 2019-06-27T09:43:49.641Z

thanks alot, u have me back on the road again… but… still no go… The door isn’t still not working. Everyone can walk into the door and no message that u can close or open the door.

So the sollution is near, but howto?

TheIndra · 2019-06-27T10:10:55.169Z

Do you see any errors in f8 console?

DutchMgamer · 2019-06-27T12:03:43.580Z

Nope get no error and the rest of the Doors working so also the script is not stopping everything works only the new added door not

DutchMgamer · 2019-06-28T10:10:06.999Z

Someone??

TheIndra · 2019-06-28T11:04:27.138Z

Vector3 might need to be with an non capital character so vector3()

DutchMgamer · 2019-06-28T12:07:41.395Z

I can try this… But the working codes have also the ( ) so Thats why I try that… I have copyed the code from a working one in the script and adit the right name and cordinates… But I give it a try without… Let u know

DutchMgamer · 2019-06-29T10:47:22.200Z

I have found it…
The coords where wrong, now I have found the right coords and it works…

Kevin_Gregoire · 2019-06-30T00:39:31.324Z

what is the good script for the strip club door please

Dolu · 2019-06-30T18:14:59.916Z

You can use Codewalker to get the coords of any object.

Vanilla Unicorn front and back doors :

        {
		objName = 'prop_magenta_door',
		objCoords  = {x = 96.092, y = -1284.854, z = 29.438},
		textCoords = {x = 95.392, y = -1284.854, z = 29.738},
		authorizedJobs = { 'unicorn' },
		locked = true,
		distance = 2.5,
		size = 1
	},
        {
		objName = 'prop_strip_door_01',
		objCoords  = {x = 127.955, y = -1298.503, z = 29.419},
		textCoords = {x = 128.500, y = -1298.053, z = 29.719},
		authorizedJobs = { 'unicorn' },
		locked = true,
		distance = 10,
		size = 2
	},

Kevin_Gregoire · 2019-06-30T18:36:06.769Z

Alright Thanks you

DansMatee · 2019-07-08T07:34:18.574Z

have tried this but to no avail? any other suggestions on the same topic?

Dolu · 2019-07-09T01:08:01.452Z

You need unicorn job, fully working for me…

DansMatee · 2019-07-09T05:09:21.591Z

Unicorn job is installed and running perfectly fine, I just can’t lock the doors

DutchMgamer · 2019-07-09T06:51:00.453Z

Do u have the old doorlock version or new?
?

vector3 is the old one (in the code)

DansMatee · 2019-07-09T07:02:00.566Z

I’ve used the vector3 and the {x, y, z}

DutchMgamer · 2019-07-09T08:09:55.039Z

???

You have 2 scripts versions installed? Why and this giving error or no working Doors… Choose 1 of them or vector3 or x, y, z

DansMatee · 2019-07-09T08:12:56.957Z

Sorry, I tried both methods, both didn’t work. the rest of my script is using the x,y,z

DutchMgamer · 2019-07-09T10:45:25.464Z

U need 1 of the 2 scripts and not using 2 codes in one script then it not working… It works great here so it works

Not_Vexii · 2020-07-09T03:29:46.768Z

i can see the lock but the door is stuck the other way any fix?

sharkariam · 2020-07-25T12:19:29.879Z

How can I make sliding doors work? https://mwojtasik.dev/tools/gtav/object/6371